Docking the iPod
To dock the iPod press the bottom of the docking door to expose the connector.
Place the iPod into the grip of the insert and gently slide onto the connector.
Note: The unit is able to charge the iPod even when in standby.
Note: If the iPod is not detected when it is docked or the connection is intermittent check the
correct insert is being used.
Using the iPod
Touch the Source button to cycle through the available sources until iPod is displayed
Note: iPod is only available as a source if an iPod is detected in the iPod Dock.
Control the iPod as you would normally to navigate to the desired track or source.
Controlling the iPod
The keypad provides some simple control of the iPod:
•
Next Track
: Touch Next ( ) to skip to the next track.
•
Restart Track
: Touch Previous ( ) once to restart the current track.
•
Previous Track
: Touch Previous ( ) twice to skip to the previous track.
•
Play/Pause
: Touch Enter to toggle between play and pause.
Undocking the iPod
To undock the iPod press the bottom of the docking door releases the pressure on the
iPod connector.
Gently pull the iPod up out of the connector before removing from the grip of the
insert.
