USING THE IPOD DOCK
The optional iPod dock can be used to playback from and charge an iPod or iPhone.
A number of inserts are provided to match each current design of iPod. These inserts
ensure that the iPod safely held in place and correctly positioned over the connector.
Fitting the Inserts
Make sure there is no iPod docked and remove the faceplate of the dock that is held in
place by magnets.
Remove the exiting insert by gently pulling it out.
Select the correct insert and make sure it is properly seated with each locating pin fully
located.
Replace the dock faceplate.
Note: Please take the time to select the correct insert for the iPod to be used so it locates
correctly and is safely held in place.