USING THE MENUS
Set-up menus can be accessed by touching the
Menu
button. When in a menu using the Previous ( ) and Next
( ) buttons cycles though the available options and
touching
Enter
makes the selection.
To exit a menu and go back to normal operation, touch the
Menu
button again or wait
until the display returns to normal.
Note: When the unit is in standby, not all menu options are available
Note: DAB scan is only available when the DAB is the selected source.
Clock Settings
Note: when the unit is powered-up it will try to get the
current time from the DAB signal. However, if reception is
poor, it may be necessary to set the clock manually.
Clock settings can be found by touching
Menu
, using the
Previous ( ) and Next ( ) buttons to cycle though the
options until “
Clock Settings
”is displayed and then
touching
Enter
.
The Hour setting will flash. Use the Previous ( ) and Next
( ) buttons to adjust it and touch
Enter
to save the
setting.
The Minute setting will flash. Use the Previous ( ) and
Next ( ) buttons to adjust it and touch
Enter
to save the
setting.
The am/pm setting will flash. Use the Previous ( ) and
Next ( ) buttons to adjust it and touch Enter to save the
setting and return to normal operation.
Alarm Settings
Alarm settings can be found by touching Menu, using the
Previous ( ) and Next ( ) buttons to cycle though the
options until ‘Alarm Settings’ is displayed and then
touching Enter.
The principal advanced alarm setting to review is Alarm Sound:
•
PRESET WITH BEEP
overlays a beep on the chosen preset. If this option is chosen
the next two options will be to choose the Preset to use for the alarm and a snooze
Set current time
12
:00am
Set current time
12:
00
am
Set current time
12:00
am
<< Menu >>
Alarm Settings
<< Menu >>
Alarm Settings
<< Menu >>
Clock Settings
Set current time
12:00am
