sLAN/all-PoE
User Manual
14
Network Setting
Network Setting page will be displayed in the initial screen of the Web setting, which shows the Network information of the
equipment as below:
You can set network environments and network management in the Networking Setting page. Once you have changed the
settings, you must press the [Submit] button to save the changed value and restart it through the [Reboot] menu to apply
them to actual equipment operation. If you exist without saving the changes, the changed value will be lost.
If you have not saved the modified value by the [Submit] button, you can return to the value before changing with the [Cancel]
button.
The main features of Networking Setting page are as follows:
Menu
Default
Description
Device Name
sLAN/all
Set the name of the device
MAC Address
Own Address
Show MAC Address
Connection Type
Static
Select whether to use Static IP to use fixed IP or Dynamic IP to use
assigned IP using DHCP
IP Address
192.168.0.223
Set the current IP address
(If the Connection Type is Static IP, enter the IP address directly. If
DHCP, the current IP is displayed and cannot be changed.)
Subnet Mask
255.255.255.0
Set the current Subnet Mask address
(If the Connection Type is Static IP, enter the subnet mask address
directly. If DHCP, the current subnet mask address is displayed and
cannot be changed.)
Gateway
192.168.0.254
Set the current Gateway address
(If the Connection Type is Static IP, enter the gateway address
directly. If DHCP, the current gateway is displayed and cannot be
changed.)
DNS
168.126.63.1
Set the IP address of the DNS(Domain Name Service)
