sLAN/all-PoE
User Manual
13
7. Settings
Precaution for Web Access
Web setting is not supported in the network environment below 10Mbps as shown below:
Therefore, if you use the Web to change the settings, you must be in 100Mbps network environment or connect the integrated
device to a PC as shown below. If it is difficult to set the environment, please use the SGConfig utility to set up the device.
Please refer to the ‘Access’ part of the previous page when directly connecting and setting with the PC.
Connection
When you open a Web browser and enter the IP address of sLAN/all PoE, an authentication window appears on first time
connection. With the default ID “slan” and the password “99999999”, the Web setting page appears.
