SystemBase C530xr, User Manual

Page: 9 / 18

9
System Options
The user can modify the global System configurations of the Codec.
Password
The C530xr has two levels of password protection to avoid accidental re-configuration; Edit Lock
and Full Lock.
The user can view all configuration menus but is not allowed to make any changes - the
YES
button is disabled. Edit Lock enables ISDN calls to dialled and hanged. Full Lock disables ISDN
dial and hang, however, incoming ISDN calls will be answered.
Loopback
The C530xr can be configured to provide an internal digital loopback of the compressed audio
signal prior to the X.21 / ISDN interface. The loopback function will automatically use the highest
data rate available.
NOTE : The loopback function is not available when operating in Backup Master or Backup Slave modes.
Ethernet Options
The C530xr can be remotely managed via the Ethernet Port. The display will show:-
Inactive,
Negotiation,
100BASE-TX full-duplex,
100BASE-TX half-duplex
10BASE-TX full-duplex
10BASE-TX half-duplex
Ethernet DHCP
When Dynamic Host Configuration Protocol (DHCP) is selected to ON the C530xr will request a
temporary IP Address from the IP Server and thereby simplifying the setup process.
MENU: Ethernet DHCP
MENU: Ethernet DHCP MENU: Ethernet DHCP
MENU: Ethernet DHCP
ON / OFF ON / OFF ON / OFF ON / OFF
MENU: Ethernet Options MENU: Ethernet Options MENU: Ethernet Options MENU: Ethernet Options
100BASE
100BASE 100BASE
100BASE-
- -
-TX full
TX full TX full
TX full-
- -
-duplex
duplex duplex
duplex
MENU: Password MENU: Password MENU: Password MENU: Password
Not Set Not Set Not Set Not Set
MENU: Loopback
MENU: Loopback MENU: Loopback
MENU: Loopback
Off Off Off Off