SystemBase C530xr, User Manual

Page: 13 / 18

13
REMOTE MANAGEMENT
The C530xr Codec can be configured
remotely by connecting a straight 9 Way D-
Type cable to the MGR IP port, and using the
Standard Windows Terminal Program. To
configure more than one unit at the same
time, the user can connect another straight
9 Way D-Type cable from the MGR OP port of
the first unit, to the MGR IP port of the next
unit, in a “Daisy Chain” manner. There are
no limitations on the number of codecs
which can be linked together for remote
configuration purposes.
On initial connection, the Standard Windows
Terminal Program screen will be blank. The
user should then press the Enter key to clear
the command buffer.
Type “poll” followed by the serial number :-
poll 0108-001 < carriage return / enter >
0108-001>
A prompt of the actual serial number will
appear on the screen. The unit is now ready
to receive commands.
Type “help” for a complete list of commands
and options.
0108-001 >help
C530xr Network Commands, (c) Systembase
Limited
poll (8 digit serial number of unit to be
selected)
status (displays the codecs current status,
/s option for short)
set x21 (APTX:3K7 Stereo 64Kbps,
APTX:7K5 Mono 64Kbps,
APTX:7K5 Stereo 128Kbps,
APTX:15K2 Mono 128Kbps,
APTX:12K2 Stereo 192Kbps,
APTX:22K5 Mono 192Kbps,
APTX:15K2 Stereo 256Kbps,
APTX:22K5 Stereo 384Kbps)
set aux (Off,
9600bps,
4800bps,
2400bps,
9600bps(alt),
4800bps(alt),
2400bps(alt),
Relay Mode)
set source (Analog, AES3)
set loopback (Off, On)
The Status command will display the
following information on the codec.
0108-001>status
SYSTEMBASE C530xr(c)
APTX Status= SYNC
Loopback= Off
Aux Data= Off
X21 Audio= APTX:22K5 Stereo 384Kbps
Audio Source= Analog