11
7.5KHz Stereo
12KHz Stereo
15KHz Stereo
The
YES
button is used to confirm the
selection, the
NO
button to abort the edit:
MENU : X.21 Audio
STATUS : 15KHz Stereo
NOTE: When operating in Mono, only the Left Input
and Left Output audio channels are active if the
Audio Mixing option has been switched OFF.
X.21 Auxiliary Data Port
MENU : X.21 Aux Data
STATUS : Off
The
button can now be used to select
the X.21 Auxiliary Data Port Mode, the
display changes as follows:
EDIT : X.21 Aux Data
OPTION : Off
The
and
buttons can be used to
scroll through the options:
Off
2400bps
4800bps
9600bps
Press the
YES
button to save the changes,
and the
NO
button to abort the changes:
MENU : X.21 Aux Data
OPTION : 9600bps
NOTE: CTS output signal should be used for Flow
Control when Auxiliary Data is enabled.
X.21 Control Line
MENU : X.21 Ctl Line
STATUS : Off
The
button is used to enable/disable
the X.21 Control Line, the display changes
as follows:
EDIT : X.21 Ctl Line
OPTION : Off
The
and
buttons can be used to
scroll through the options:
OPTIONS : Off, On
Press the
YES
button to save the changes,
and the
NO
button to abort the changes:
MENU : X.21 Ctl Line
OPTION : On
Backup Options
The
button is used to enter the next
level of the menu system, which allows
the user to modify the parameters associ-
ated with the automatic ISDN Backup and
Restore operation.
NO
TE: The Backup Level and Restore Time are
global settings, and not per Patch memory.
Backup Monitor
MENU : Backup Monitor
Level = 050
Errors = 000
This menu displays the number of Sync
Loss Errors in the last 10 seconds, (sam-
pled at 100ms intervals), and the Level at
which the automatic ISDN Backup is
initiated. The Backup Level can be set to
different values on the Master and Slave
units, in order to bias the sensitivity of the
link in either direction. The
button can
be used to edit the Backup Level , the
display changes as follows:
EDIT : Backup Monitor
Level = 050
Errors = 000
The
and
buttons can be used to
select the required Backup Level (0 to 100).
The
YES
button is used to confirm the
selection, the
NO
button to abort the edit:
MENU : Backup Monitor
Level = 004
Errors = 000
Restore Monitor
MENU : Restore Monitor
Time = 05s
Errors = 000
(Factory Defaults)
This menu displays the number of Data
Summary of Contents for C400xr
Page 27: ...27...
