_____________________________________________________________________________________________________
Topvex SR07, SR09, SR11 E
Installation instruction
205870
Systemair AB
11
Separating the appliance
On delivery the two halves of the Topvex appliance are mounted together. If necessary they can be
separated for easy transport to the site of installation.
How to split the unit:
A. Loosen the cable connectors in the wall
B. The two halves of the appliance are joined using 4 M10 screws, one in each corner
C. Control section
D. Heat recovery section
E. It’s possible to dismount the gables by removing 6 MRX M6 screws with TH2 bits tool
Reassemble in the reverse order.
The illustration shows a left-handed version of the unit.
Important!
When reassembling the pieces make sure they are connected
correctly - see cable markings on the side of the cables.
Summary of Contents for Topvex SR07 E
Page 27: ......
