Version
Document
Preliminary 003
Access V4.X Configuration manual
3 (33)
2019-05-13
1. About the manual
This manual is intended to guide while configuring basic functions of the Access controller. It also gives a
general overview of the software and interface.
1.1 Basic settings
Access levels
The controller has four user access levels. The active user access level is indicated by icon.
End user
When logged out
Read /write
—
Home page.
Possible actions in end user mode are to stop the air
handling unit for maintenance (e.g. filter exchange),
change the time for extended run and change the
temperature setpoint.
Operator mode
(Log in with 1111)
Read and write privileges (except Configuration).
Service mode
(Log in with 0612)
Full read and write privileges.
Date and time
ACCESS controller has a year-base clock function. The clock has an automatic summertime/wintertime
change-over.
Date and time can be set
Time settings > Date / Time
Preference unit settings
Preferred units for temperature, flow and pressure can be set
Configuration > System settings > Preference unit settings
Save and restore
Commissioning settings can be stored in a local memory.