59
Figure 33
Motion Detect Record Setup
4.
Sensitivity
: motion detection sensitivity is from 00 to 99. Default is 50.
5.
Area Setup
:Click ”
set
” on certain channel, motion detection zone setup interface
appears:
Figure 34 Motion Detect Area setup
Motion detection setting is only available in the green area, in which the green area
represents the selected area. White area represents the unselected area.
Move the cursor using
up/down/right/left
keys. Press “
OK
” for area setup /clearance.
Press”
Cancel
” to return to the dialogue box. Maximum 192 individual areas can be set.
Press”
OK
” to make all settings effective. Press “
Cancel
” to cancel any changes.
6.
PTZ Preset
: (P/T/Z action: 00.) Default as: 00. PTZ preset can be activated for
corresponding input port.
7.
Record Time
(Recording time in seconds)
8.
Rec. Quality
(Recording quality):
LOW, BASIC, STANDARD, HIGH, SUPER
. The
default is
STANDARD
. Recording frame rate:
FULL, 1/2F, 1/4F, 1/8F, 1/16F
. The
default is
FULL
. Stream type:
CBR
or
VBR
. Default as:
CBR
.
9.
Alarm No.
Specify alarm number and alarm time in seconds.
10.
Time1 / Time2
(Recording interval 1 and 2): two intervals can be set for each day
within the setup interval external alarm inputs. Leave Time option set to
off
if not used.
