Model DSD32R
2
INSTALLATION & SAFEGUARDS
Please read these instructions before operating the unit.
Installation.
1. To prevent electric shock or other hazards, do not expose DVR to rain, moisture or
dust.
2. Place the DVR in a well-ventilated place and do not place heat-generating objects on
the unit.
3. The DVR should not be located in an area where it is likely to be subjected to
vibration.
Before You Start.
1. Ensure that the power switch is in the off position prior to starting.
2. Do not attempt to open or remove the covers. This may expose you to dangerous
voltage or other hazards.
3. Installation should be performed by a qualified service person only.
4. This unit should be operated only from the type of power source indicated on the
manufacturer’s label.
Special Note.
If you need to change the TIME/DATE always clear the Hard Drive. If you don’t follow this
step first, it may cause erratic behaviour of the DVR and possible loss of recordings.
1. It is recommended to use the same manufacturer when installing Hard Drives.
2. For Motion Detection recording the channel needs to be turned off in the time
Schedule.
3. When backing up data to a USB stick, ensure that the USB stick is formatted to
FAT32 in a PC before data backup is attempted.
