Model DSD32R
32
Section 4 PTZ Control
PTZ Control.
Provides control of PTZ operations such as PTZ preset position settings and PTZ
original position setting.
Set Up for PTZ Control.
Access the PTZ setup menu as follows.
Main Menu / PTZ Set Up / PTZ SetUp
You then select the PTZ channel, PTZ address, Baud Rate and Protocol.
Select Connect and then when the channel is selected you have control of the PTZ
( PTZ mode must be selected ).
Controlling a P.T.Z.
1.
Select a channel with a PTZ.
2.
Press ‘
PTZ ’
( panel ), or ‘
P/Z ’
( remote control ) to enter PTZ. control mode.
3.
Use the ‘
Up ’
and ‘
Down ’
keys to adjust the vertical angle of PTZ.
4.
Use the ‘
Left ’
and ‘
Right ’
keys to pan the PTZ. left and right horizontally.
5.
To define the current PTZ location as the ‘ original ’ position, press ‘
’
( panel )
or ‘
setup ’
( remote control ).
6.
To return to the ‘ original ‘ position from current location rapidly, press Stop ‘ ’
(panel) or ‘
Return ’
( remote control ).
7.
Press ‘
PTZ ’
( panel ) or ‘
P/Z ’
( remote control )and the system will quit PTZ
control mode and return to the normal surveillance mode.
