E-mail: [email protected] or Fax: 01246 222 888
Page - 11 -
If you select “Exit Without Save”, your changes will be lost.
5.2 Monitor
Press “MENU” to move to the next page and you will see the “Monitor” page. This page
allows you to adjust the video output from the multiplexer to the monitor. Items 1 ~ 4 will
adjust the picture quality. You can use the left/right directional keys to adjust their values.
Monitor
Brightness
45
Contrast
22
Saturation
45
Hue
51
Split Resolution
High
Call Monitor Dwell
5
Digital AGC
Dis
5.2.1 Split Resolution
If the monitor picture is suffering from a flicker of the video image due to sharp video, the
Split Resolution can be set to ‘Low’ to eliminate it.
5.2.2 Call Monitor Dwell
The call monitor will always switch full screen images of all installed cameras. This item
allows you to set the Dwell Time between switching. The timer ranges from 1 to 255, which
means the dwell time of each camera on the call monitor can range from 1 second to 255
seconds. You can the use left/right directional key to set the dwell time.
5.2.3 DAGC
DAGC (Digital auto gain control) is used to control the playback video level. If a weaker
video signal occurs when the VCR playback is being watched through the multiplexer, this
can be enhanced by enabling the DAGC. Use the directional keys (
←
←
←
←
→
→
→
→
)
to change the
setting (enable or disable).