IMPORTANT SAFETY INSTRUCTIONS
WARNING:
IT IS IMPORTANT THAT YOU READ AND OBSERVE BOTH THE INSTRUCTIONS IN THIS
MANUAL AND THE INSTRUCTIONS ON THE UNIT. KEEP THIS MANUAL FOR FUTURE REFERENCE .
This unit was designed and manufactured with a view to providing maximum safety for the user.
Incorrect use of the unit may cause electrical shock or fire. The protection devices built into this unit
will protect the user if the procedures below are observed in connection with installation, use and
repair. This unit is fully electronic and contains no parts that can be repaired by the end user .
PLEASE DO NOT REMOVE THE CABINET. RISK OF DANGEROUS VOLTAGE. ONLY QUALIFIED AND
AUTHORIZED TECHNICIANS ARE ALLOWED TO REPAIR THE UNIT.
Read the manual upon unpacking the unit
Please read the manual carefully and observe all the instructions given.
Power supply
Only the power supply indicated on the rating plate must be used for this unit.
If you are not sure which power supply you have, please contact the distributor or the local
electricity supplier.
Earthing or polarisation
If the plug cannot be inserted properly into the socket, or if the plug does not fit, the unit must
not be used in your country.
4
SAFETY PRECAUTIONS
A triangle with a lightning symbol draws the user’s attention to “dangerous voltage”
without insulation in the cabinet which may be high enough to entail a risk of electric
shock.
A triangle with an exclamation mark draws the user’s
attention to important instructions for use and maintenance in the accompanying manual,
which should be studied.
A symbol for CLASS II (double insulation)
WARNING:
TO MINIMISE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THE UNIT TO RAIN OR
MOISTURE. DO NOT OPEN THE CABINET AS IT CONTAINS DANGEROUS VOLTAGE. ONLY QUALIFIED
TECHNICIANS ARE ALLOWED TO CARRY OUT REPAIR AND SERVICE.
CAUTION:
If the plug of the power cord needs to be replaced, it is important that the replacement is identical to the
plug to be replaced, or that the new plug has been recommended by the manufacturer.
TO AVOID ELECTRICAL SHOCK, IT IS IMPORTANT TO INSERT THE PLUG CORRECTLY INTO THE SOCKET.
