OPTIONAL PULL-BEHIND ATTACHMENT ASSEMBLY
STEP 8
(Optional Pull-behind Model Only)
ASSEMBLY OF THE PULL-BEHIND TOW HITCH
See
STEP 8
photo before proceeding
1. The first step with the help of an assistant, is to remove the nuts and
lock washers from the lift pins where the S-shaped hitch brackets attach
to the A-frame.
2. Then carefully slide them out until they are flush with the inside of the
S-brackets.
3. At this time place the hitch arm between the S-brackets and replace the
nuts.
4. Next attach the top link to the top of the 3 point hitch
FIG 8A
.
5. Now lift the hitch arm up and connect it to the other end of the top link
with the hitch pin
FIG 8B
.
6. In order to adjust the top link you need to insert the adjusting pin in the
hole in the center of the top link and firmly tap it through with a ham-
mer.
7. Now adjust the top link until the hitch arm is parallel to the A-frame.
8. Finally using the 1/2” x 4 1/2” bolt and lock nut attach the adjustable
tow arm to the end of the hitch arm at the required height for your tow
vehicle.
PULL-BEHIND ATTACHMENT
Hitch arm
Tow arm
Hitch pin
Lift pin nut
and lock
washer
Lift pin nut
and lock
washer
Hitch pin
Top link
adjustment
pin
Top link
STEP 8
Hitch pin
1/2” x 3” bolt
and lock nut
Hitch arm
Tow arm
Top
Link
PULL-BEHIND HITCH PARTS
Hitch
pin
S-shape
bars
Top link
FIG 8A
Cotter
pin
Hitch pin
Cotter
pin
Top
link
Hitch arm
FIG 8B
Summary of Contents for TRC-6
Page 8: ......
