14
systembuild.com
STEP 7
IMPORTANT!
THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
With the help of another person, turn the unit over on its front side. Positon back panel
as shown. Align squarely with outer edges. Flush bottom edge of back panel with
bottom edge of the bottom and nail straight into back edges of left panel (A), right panel
(B), top (C) and bottom (D).
(x42)
#A21110
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
Make sure edge of back panel is flush
with bottom edge of the bottom.
4
B
D
raw
surface
4
finished
edge
Summary of Contents for 6990333
Page 11: ...11 systembuild com STEP4 2 x4 A12105 x2 A30030 12a D 12a 2 2...
Page 12: ...12 systembuild com STEP5 2 x2 A12105 x1 A53510 6 unfinished surface G D 2 2 6...
Page 18: ...18 systembuild com STEP11 2 x4 A12105 15 x2 A54520 2 2 2 2 15 15 I...
Page 20: ...20 systembuild com STEP13 finished surface DWR SIDE I DWR SIDE J...
