System Build 6990333, Instruction Booklet

Page: 15 / 34

15
systembuild.com
STEP 8
14d
(x1)
#A84050
stud
wallboard
hole
14d
14c
14c
WARNING
Serious or fatal crushing injuries can occur from
furniture tipover.
To prevent tipover:
* Install tipover restraint provided
* Place heaviest items in the lowest drawers
* Unless specifically designed to accommodate, do
not set TVs or other heavy objects on the top of this
product
* Never allow children to climb or hang on drawers,
door, or shelves
* Never open more than one drawer at a time
Use of tipover restraints may only reduce, but not
eliminate the risk of tipover
OPTION 1: Attachment into a wall stud (preferred
method)
Using a stud finder, locate a stud in the wall. Place your
unit against the wall, with the safety bracket aligned in
this location. To make driving the screw easier, you can
drill a 1/8" diameter pilot hole (3mm) through the safety
bracket into the stud. Drive the screw through the safety
bracket into the wall stud. Tighten the screw that was not
fully tightened in step 3.
OPTION 2: Attachment into drywall
Locate your unit where desired against a wall and mark
the wall through the safety bracket, then move your unit
aside. Drill a 3/16" diameter hole (5mm) into the
wallboard. Tap the wall anchor into the hole until it is
flush. Move your unit into location and fasten the wall
bracket to the wall anchor with the screw. Tighten the
screw that was not fully tightened in step 3.
For Masonry, Concrete, or other
wall materials:
Consult your local hardware store
for appropriate anchors to securely
attach the safety bracket.
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO
HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO
INSTALL THE ANTI‐TIPPING SAFETY BRACKET PROVIDED WITH
THIS PRODUCT.