8
Packaging and transport
8.1 Packaging the device
The packaging protects the contents from damage or other deleterious
effects that could adversely affect their quality.
Retain the original packaging so that it can be reused for
–
storage,
–
transport and
–
return for disposal
as and when necessary.
If you fail to do this it will no longer be possible to guarantee
protection from damage or other harmful influences.
8.2 Transporting the device
NOTICE!
Material damage caused by inappropriate transport.
Inappropriate transport may damage the device.
– Pay attention to the handling symbols on the trans-
port packaging.
– Comply with the stated transport requirements (see
Ä
“Transport requirements” on page 37
).
When transporting the device you should comply with the following
requirements:
n
Always shield the equipment from solar radiation.
n
Avoid mechanical vibration and shocks.
n
Avoid extreme temperature fluctuations.
n
Pay attention to the information in the “Technical data” section.
When the consignment is delivered, immediately check it for
possible transport damage and deal appropriately with any
detected transport damage or non-obvious defects.
Transport requirements
Packaging and transport
Transporting the device
WAVE 224 monitor/thin client - Industrial monitor/thin client
37
Summary of Contents for WAVE 224
