IPC/NETIPCFW-1A: User Documentation
DOC/NETIPCFW-E; V3.0
3.
Download
the new BIOS and bootable ROM-drive into the target:
–
Connect the target COM1 port via a Null-Modem cable to the COMx-port of
your host-PC (x = port number)
–
Run the NETIPC boot loader program
–
Power-on the target in the boot-load mode (see DOC/IPC_NETIPC)
–
Enter INITx after the boot loader program prompt (x = host-PC COM port
number)
–
Wait for connection to target (Message „Target connected at .....“)
–
Enter EBIOS (or EBIOSX) to download the new Embedded BIOS
–
Wait for error-free completion (Note: takes several seconds, do never
interrupt !)
–
Enter NDRIVE_X download the bootable ROM-drive A:
–
Wait for error-free completion (Note: takes several minutes, do never
interrupt !)
–
Enter QUIT to automatically update the flash-tables and leave the boot loader
program
–
Wait for error-free completion (Note: takes several seconds, do never
interrupt !)
5.
Start Up the target
:
–
Reset and Start Up the target in RUN-mode
The Linux operating system is now installed on the target.
Please remember that you need a
valid run-time license (not available from Syslogic).
Use MAKEDRV2.BAT instead of MAKEDRVX.BAT and NDRIVE_2 instead of NDRIVE_X
for a 1.44 MByte ROM-Drive. See also chapter 4.4 for more information about generating a
704 kbyte or 1.44 Mbyte ROM-Disk image.
© Syslogic Datentechnik AG, CH-5400 Baden, Switzerland, http://www.syslogic.ch
40
/
45
