IPC/NETIPCFW-1A: User Documentation
DOC/NETIPCFW-E; V3.0
4.6.
NETIPC board configuration differences
The binary BIOS image file BIOS.BIN delivered on the NETIPCFW is preconfigured with the
factory defaults for the
CUB/NETIPC-1A
board. The binary BIOS image file BIOSF.BIN
delivered on the NETIPCFW is preconfigured with the factory defaults for the
IPC/NETIPC-
5A
board.
IPC/NETIPC-1A,-1B,-2A,-3A and CUB/NETIPC-1A,-1B are delivered with Embedded BIOS
V4.x installed. This BIOS uses BCP with file BIOS.BIN for binary configuration and only
requires 64kbyte in the target system (address F0000h to FFFFFh).
IPC/NETIPC-5A is delivered with Embedded BIOS V5.x installed. This BIOS uses BCPX
with file BIOSF.BIN for binary configuration and requires 128kbyte in the target system
(address E0000h to FFFFFh).
All NETIPC boards may be used with Embedded BIOS V5.x but the IPC/NETIPC-5A is not
supported by Embedded BIOS V4.x.
Two of the BIOS options must be changed if you want to download the BIOS image to another
NETIPC board type.
1. The Board Type must be adjusted in the menu ‘Target Board’. This also adjusts the main
memory size to the maximum supported by this Board Type.
2. The graphics frame buffer size eventually must be reduzed when changing to a NETIPC-
1B due to the smaller main memory available.
WARNING
: if this options are not adjusted correctly, the memory test and board operation
may fail.
© Syslogic Datentechnik AG, CH-5400 Baden, Switzerland, http://www.syslogic.ch
24
/
45
