IPC/CO MPACT6-XS: user documentation
DOC/COMPACT6-XSE; V1.3
© Syslogic Datentechnik AG, CH-5405 Baden-Daettwil, Switzerland, http://www.syslogic.ch
9
/
32
The products are operated with electrical power. Before manipulating the products, they must
be disconnected from the power source and from the communication signals.
The products require set-up procedures before they can be operated. Before being used in an
actual installation, they must be correctly configured. If the products are not or wrongly
configured, they may malfunction in the intended application.
The products must be assembled and installed by specially trained people. The strict
observation of the assembly and installation guidelines is mandatory.
1.6.
Electro-Static Discharge
Electronic boards are sensitive to Electro-Static Discharge (ESD). Please ensure that the
product is handled with care and only in a ESD protected environment. Otherwise a proper
operation is not garanteed.
1.7.
Life Cycle Information
1.7.1.
Transportation and Storage
During transportation and storage the products must be in their original packing. The original
packing contains an antistatic bag and shock-absorbing material. It is recommended, to keep
the original packing in case of return of the product to the factory for repair. Note that the
packing is recyclable.
1.7.2.
Assembly and Installation
Observe the EMI-precautions against static discharge. Carefully read the assembly and
installation guidelines in this document before unpacking the products. Make sure that you
have all the necessary items ready (including all the small parts).
The installation procedures must be strictly observed. Note that deviations from the installation
guidelines may result in degraded operational reliability or in unfavorable EM-radiation or
EM-susceptibility.
1.7.3.
Operation
The operating environment must guarantee the environmental parameters (temperature, power
supply, etc.) specified in the technical specification section of the manuals.
The main functionality of the IPC/COMPACT6-XS is defined by the application programs
running on the system. The application programs are not part of the delivery by Syslogic but
are defined, developed and tested by the customer or a system-integrator for each specific
application. Refer to the respective documentation for more information.
1.7.4.
Maintenance and Repair
The IPC/COMPACT6-XS features error- and malfunction-detection circuitry. Diagnostic
information gathered is transferred to the applications software where it can be used. In the rare
case of a module hardware-failure or malfunction, the complete module should be exchanged.
