Sysgration TPMS TT02, User Manual

Page: 19 / 26

TPMS TT02 User Guide
Sysgration Confidential 19
- VVVV = Battery voltage (Oct)
Ex:VVVV =8315 , TT02 battery voltage is 8315 mV
Set Backlight ON/OFF (Test Mode only)
COMPUTER --> TT02: " $ZTBKLX# ", 8 bytes,
- $ZTBKL X# = Command Code
- $ZTBKL X # = Backlight ON or Backlight OFF, “$ZTBKL 1 #” : ON, “$ZTBKL 0 #” : OFF
If Success,
TT02 --> COMPUTER: "$ ZTBKLOK #" , 9 bytes
Set Buzzer ON/OFF (Test Mode only)
COMPUTER --> TT02: " $ZTBUZX# ", 8 bytes,
- $ZTBUZ X# = Command Code
- $ZTBUZ X # = Buzzer ON or Buzzer OFF , “$ZTBUZ 1 #” : ON, “$ZTBUZ 0 #” : OFF
-
If Success,
TT02 --> COMPUTER: "$ ZTBUZOK #" , 9 bytes
Get Charging State (Test Mode Only)
COMPUTER --> TT02: " $ZTCHA# ", 7 bytes,
If Success,
TT02 --> COMPUTER: "$ ZTCHAX #" , 8 bytes
- $ZTCHA X# = Command Code
- $ZTCHA X # = Charging state, “$ZTCHA 1 #” : Is Charging, “$ZTCHA 0 #” : Not Charging.
Set LF Power Level (Test Mode Only)
COMPUTER --> TT02: " $ZTLFX# ", 7 bytes,
- $ZTLF X# = Command Code
- $ZTLF X # = Level Value, “$ZTLF H #” : High Level, “$ZTLF N #” : Normal Level.
If Success,
TT02 --> COMPUTER: "$ ZTLFOK #" , 8 bytes