background image

       

TPMS TT02 User Guide 

Sysgration Confidential

 

25

1.11.

 

It will take a little time to update the OTA firmware, please wait for a while. The message will 
pop-up to notify when the firmware update is completed: 

1.12.

 

Please confirm that your TT-02 has completed the FW update and check your TT-02 can work as 
well.   

For example: You can check the firmware-version of the TT-02. Whether it has been updated or 
not, and so on. 

Federal Communication Commission Interference Statement 

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. 

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one of the following 
measures: 
. Reorient or relocate the receiving antenna. 
. Increase the separation between the equipment and receiver. 
. Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 
. Consult the dealer or an experienced radio/TV technician for help. 

FCC Caution

: To assure continued compliance, any changes or modifications not expressly approved by 

the party responsible for compliance could void the user's authority to operate this equipment. 
(Example - use only shielded interface cables when connecting to computer or peripheral devices). 

FCC Radiation Exposure Statement 

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled 
environment. This equipment should be installed and operated with a minimum distance of 

0.5

 centimeters between the radiator and your body. 

This transmitter must not be co-located or operating in conjunction with any other antenna or 
transmitter. 

The antennas used for this transmitter must be installed to provide a separation distance of at least 

0.5

  cm  from  all  persons  and  must  not  be  co-located  or  operating  in  conjunction  with  any  other 

antenna or transmitter. 

Summary of Contents for TPMS TT02



























Reviews: