20
11. Adjustment
11.1 Separator Gap
11.1.1 Turn the knob to correct double feed or feed failure. Turn clockwise to make
the separator gap small and turn counter-clockwise to make it large.
11.2 Blow Flow
11.2.1 Turn the knob so that the air gate change. Depend on paper type and
feeding situation to adjust blow flow. Turn clockwise to make the blow flow strong
and turn counter-clockwise to make it weak.
11.3 Stack Height Sensor
11.3.1 Depend on paper type and feeding situation to adjust it. Turn clockwise to
make stack go higher and turn counter-clockwise to make stack go lower.
