Syscom Video IR Dome Network Camera Instruction Manual Download Page 64

Page: 64 / 69

3.8 Resetting to the factory default settings

To reset the Network Camera to the original factory settings, go to the Setup>System> Maintenance
web page (described in “3.5.5 System > Maintenance”) or use the Reset button on the network
camera, as described below

Reset Button

•

Using the Reset Button

Follow the instructions below to reset the Network Camera to the factory default settings using
the Reset button.

1. Switch off the Network Camera by disconnecting the power adapter.

2. Press and hold the Reset button while reconnecting the power.

3. Keep the Reset button pressed during about 2 seconds or more than.

4. Release the Reset button.

5. The network camera resets to factory defaults and restarts after completing the factory

reset.

Caution:

When performing a Factory Reset, you will lose any settings you have saved.

(Default IP 192.168.30.220)

Summary of Contents for IR Dome Network Camera






































































Search results

Summary of Contents for IR Dome Network Camera

Reviews:

Related manuals for IR Dome Network Camera

Brands by name

Popular brands

Syscom Video IR Dome Network Camera, Instruction Manual

Search results

Summary of Contents for IR Dome Network Camera

Reviews:

Related manuals for IR Dome Network Camera

Brands by name

Popular brands