6
Directions For Use
Syris Scientific
General Equipment Safety
WARNINGS:
To avoid the risk of electrical shock, inspect the battery charger cable and plug
for damage before use. Do not use the v900L or accessories if damaged.
Use only Syris supplied battery charger, control box, cable, battery, and
accessories. In the event of visible damage, do not use and contact Syris for
replacement. VTS1000 Power Supply is a part of the v900L system and should
only be used with battery Charger Base VTS1000-Charger.
DO NOT use the Charger Base, or insert or remove the Syris battery from the
v900L Control Module in an oxygen enriched environment.
DO NOT operate the system in a flammable or explosive atmosphere.
Unplug the VTS1000-PS Power Supply from the AC main wall outlet to remove
main power.
DO NOT position VTS1000-Power Supply and VTS1000-Charger Base where it
is difficult to disconnect the Power Supply from the AC main wall outlet.
DO NOT modify the v900L equipment without authorization of the Syris
Scientific.
DO NOT plug power supply L-shaped connector into Control Module.
CAUTIONS:
Store the device where it will not be accessible by children or untrained people.
DO NOT drop any component of the system. Physical shock may cause permanent
damage.
DO NOT use the system as a light to navigate your environment.
General Cautions
