Synway Information Engineering Co., Ltd
During software run
als if the board is
working pro
r software detects
abno
g board. The new
boar
previous, or software
parameters will have to
mov
anytime with
Note
time, the run indicator blinks at 1-second interv
perly, or, it will go on and off at irregular intervals if the drive
rmal behavior by the board and prompt users to replace the existin
d should be of the same model and placed in the same slot as the
be reconfigured. If the rear connection panel is used, remember to
e it along with the voice board. The rear connection panel can be hot-swapped at
out interrupting runtime.
:
Releasing the bottom handle at runtime will cause your board to stop operating!
SHT-16B-CT/cPCI 2.0, SHT-16B-CT/cPCI/FAX (MP3) 2.0 Hardware Manual
(Version 2.2)
Page 19
