SYNTHR SYNTHR3, User Manual, Page: 36 / 38

Page 36
SYNTHR3 Manuel V1.01 EN
APPENDIX 7 : REAR FACE
The rear panel shows the connections to the outside world:

OUT1 and OUT2 for audio connection to a mixer or line level amplifier.

CV1 and CV2 which correspond to the control voltages of the VCO1 and VCO2 which can be used to control
a modular unit for example.

Gate 1 and Gate 2 which according to the modes are either identical, monophonic mode and paraphonic
mode 1 or distinct, duophonic mode, paraphonic mode 2, arpeggio mode or keyM or keyP sequencer.
he SynthR3 can thus sequence a modular.

Clock: TTL compatible clock available in arpeggiator or sequencer mode, representing either LFO2
multiplied by the MIDI controller coefficient, or the MIDI clock imposed on the SYNTHR3 multiplied by the
MIDI controller coefficient.
APPENDIX 8 : OUTSIDE CLEANING
The wood of SYNTHR3 is not varnished but waxed, which means that it is always possible to clean and re-wax it if the need
arises. The stain on delivery is light oak.
The front panel of SYNTHR3 is made of aluminium and the inscriptions are made by a process that avoids any relief and
resists to standard cleaners. To remove finger stains or glue, I recommend F petrol available in supermarkets or wipes.