SYNTHR SYNTHR3, User Manual

Page: 29 / 38

Page 29
SYNTHR3 Manuel V1.01 EN
BRIGHTNESS LCD
100%
↕↕/Ok Escape BRIGHTNESS LEDs
100%
↕↕/Ok Escape
CPUs Softwares
Teensy V1.0.1
ATmega V1.56 V1.56
Escape
MASTER TUNE
-67mv 420Hz
-800cents
Escape
« BRIGHTNESS LCD » AND « BRIGHTNESS LEDS »
These functions are present on the "function bar”
From any main page, press "Edit" (Button B) and turn the encoder until you encounter "BRIGHTNESS LCD" or "BRIGHTNESS
LCD»
Press OK then select the desired value between 0 and 100%.
ABOUT
This function is present on the "function bar".
From any main page, press "Edit" (Button B) and turn the encoder until it encounters
"ABOUT", then validate with OK.
This page is an information page about the softwares used by the SYNTHR3 MIDI
Controller.
’exemple :
MASTERTUNE
On the front panel of the SYNTHR3 there is a potentiometer marked « Mastertune ».
This potentiometer allows to make a general detune of more or less an octave acting on
all notes in all playing modes, or arpeggios, or sequences.
Turn the potentiometer, the above screen will appear. The values indicate the difference
between the LA4 440Hz and the tuning of the SYNTHR3 in different units. To go back to the
original screen, press " Escape " (Button B) or wait a few seconds and this Mastertune
screen will be erased to automatically return to your original page.
PANIC !
To use the Panic mode, simply press the encoder push-button for 5 seconds.
Except when playing a sequence, this mode is available at all times.
It allows you to find :

50% brightness for the screen.

50% brightness for the push buttons.

Enabling automatic MIDI channel search.

Loading a standard INIT Patch:

Mode MONO.

VCO1, VCO2, VCO3 onr filter 1with triangle waveshape.

White noise enable.

Sub triangle enable.

Filter 2 on LP.
APPENDIX