Synthesis Technology MOTM-510 The WaveWarper, Assembly Instructions & Owner'S Manual

Page: 21 / 26

SYNTHESIS TECHNOLOGY PAGE 21
MOTM-510 ASSEMBLY 7/11/04
WWW.SYNTHTECH.COM
Exercises for Section 1.
1) Try patching other waveforms from the oscillators into the AUDIO ins of the 510.
2) Try using CVs instead of audio signals. You can ‘warp’ LFO triangle wave to all sorts of
bizarre shapes. Use the FULL OUT if you want to uinclude all of the DC offsets as well.
3) Try using audio rate waveforms in the OFFSET jacks.
4) Do something that I didn’t think of yet, make an MP3 of it and post it to the newsgroup.
Section 2 – Mangling Other Sources
One way of thinking about the 510 is that it is a distortion device. Don’t believe me? Try it!
How’d I do that?
With this patch:
Guitar Preamp
510
OFFSET Y
AUDIO Y
AUDIO X
AUDIO OUT
X IN = 0 X WARP = 6.5
Y IN = 10 Y WARP = 5
Z IN = 0 Z WARP = 7.5
POWER = POWER
FACTOR = 10
AUDIO Z
MOTM-440
Analog
Delay
AUDIO OUT
AUDIO OUT
Figure 2: Patch Diagram for DEMO #6