22
5
Insert the LCP 2.7 mm screw
Required instruments
Drill Bit
2.0 mm, with double markings
323.062
Screwdriver Shaft Stardrive, T8, cylindrical, with groove
313.304
Torque Limiter, 0.8 Nm, with AO/ASIF Quick Coupling
511.776
Drill the hole with the drill bit
2.0 mm. The drill will exit the
bone at the medial point of contact of the PCD.
Use a K-wire instead of the drill bit if you need to check
correct position of the plate and screw first.
Take out the drill sleeve and insert the LCP 2.7 mm screw
with 2.4 head through the PCD.
