Synthes
11
5
Pre-drill distal hole
Required instruments
LCP Drill Sleeve 2.7 (head LCP 2.4), with scale up to 60 mm
323.061
Drill Bit
2.0 mm, with double markings
323.062
Screw the LCP Drill Sleeve into one of the threaded holes
of the distal part of the plate and pre-drill a hole with the drill
bit
2.0 mm. Check the depth of the drill bit under image
intensifier.
4
Insert cortex screw
Required instruments
Screwdriver Shaft, hex small,
2.5 mm
314.030
Use the screwdriver shaft mounted on a power tool or on a
handle to insert the self-tapping cortex screw
3.5 mm. Do
not tighten the screw.
LCP Distal Humerus Plates
Dorsolateral plate with support
