Synthes Hybrid Fixator Proximal Tibia Frame Technique Manual Download Page 4

Page: 4 / 12

Recommended Components for Hybrid Fixator

Synthes

Hybrid Fixator—Proximal Tibia Frame Technique Guide

Product

Item

Quantity

Number

Needed

390.005*

Large Combination Clamp

393.464

Adjustable Wire/Pin Clamp

393.436

Ring-to-Rod Clamp

294.785*

5.0 mm Self-Drilling

Schanz Screw, 175 mm

292.38 –

Spade-Point Reduction Wire

292.41

(or Spade-Point Wire)

Notes:

Additional components are required for optional

frame configurations.

Additionally available lengths of stainless steel self-drilling
Schanz screws, stainless steel non–self-drilling Schanz screws
and titanium self-drilling Schanz screws may also be used.

* Although some components are MR Conditional, the

standard hybrid frame is

not

safe to be utilized in an

MR environment.

Summary of Contents for Hybrid Fixator Proximal Tibia Frame













Search results

Summary of Contents for Hybrid Fixator Proximal Tibia Frame

Reviews:

Related manuals for Hybrid Fixator Proximal Tibia Frame

Brands by name

Popular brands

Synthes Hybrid Fixator Proximal Tibia Frame, Technique Manual

Search results

Summary of Contents for Hybrid Fixator Proximal Tibia Frame

Reviews:

Related manuals for Hybrid Fixator Proximal Tibia Frame

Brands by name

Popular brands