background image

Also Available

Sets

105.135

4.0 mm Cannulated Screw Instrument and
Implant Set

105.185

7.3 mm Cannulated Screw Instrument and
Implant Set

105.957

Power Drive Set

115.720

Large External Fixator Set, with Self-Drilling 
Schanz Screws

115.740

Large External Fixator Set, with Titanium
Self-Drilling Schanz Screws

150.16

ComPact Air Drive II Set

Implants

Schanz Screws

294.43–.48

4.0 mm, spade point, 60 mm–150 mm

294.52–.57

5.0 mm, blunted trocar point, 
100 mm–250 mm

294.71–.76

4.5 mm, blunted trocar point, 
100 mm–200 mm

Self-Drilling Schanz Screws

294.774–.779 4.0 mm, 60 mm–175 mm
294.782–.788 5.0 mm, 100 mm–250 mm
294.792–.798 6.0 mm, 100 mm–250 mm

Titanium Self-Drilling Schanz Screws

494.774–.779 4.0 mm, 60 mm–175 mm
494.782–.788 5.0 mm, 100 mm–250 mm
494.792–.798 6.0 mm, 100 mm–250 mm

Instruments

Drive Adaptors with quick coupling

393.101

For 4.0 mm Schanz Screws

393.102

For 4.5 mm Schanz Screws

393.104

For 6.0 mm Schanz Screws

393.105

Small Universal Chuck with T-Handle

Fixation Material

390.002

Large Multi-Pin Clamp, 6 position

390.003

Rod Attachment, for Large Multi-Pin Clamp

390.008

Large Open Adjustable Clamp

393.721

Full Ring, 205 mm ID

393.731

Full Ring, 115 mm ID

393.735

Full Ring, 165 mm ID

393.737

1/4 Ring, 165 mm ID

Protective Caps

394.991

For 4.0 mm Fixation Pins, 10/pkg.

394.992

For 4.5 mm Fixation Pins, 10/pkg.

394.994

For 6.0 mm Fixation Pins, 10/pkg.

Synthes

Summary of Contents for Hybrid Fixator Proximal Tibia Frame













Reviews: