Synology VisualStation VS960HD, Hardware Installation Manual

Page: 7 / 24

7
2
Chapter
Tools and Parts for Installation
• A screwdriver
• Mounting adapter (included)
• Mounting plate (included)
• AC power adapter (included)
• RJ-45 LAN cable (included)
• s10 and s11 screws (included)
• A VESA-compliant monitor (optional)
Note: If you do not need to mount VS960HD to your monitor, please skip to "Connect
Inputs and Outputs".
Install Mounting Kit
1 Place VS960HD upside down on a flat working surface (with the I/O ports facing
towards you). Attach the mounting plate to VS960HD by installing the included
s10 screws in the four spots illustrated below.
2 Prepare the monitor by powering it off and removing any connections to it. Then,
place the monitor face down on a flat working surface (with the upper edge
pointing away from you). Attach the mounting adapter to the monitor by installing
the included s10 screws in accordance with your monitor mounting type.
Note: The mounting adapter is compatible with both MIS-D 75 and MIS-D 100 type
VESA-compliant mounting surfaces.
Installation and Setup