manualshive.com logo in svg

Synology NAS SA3200D, Hardware Installation Manual, Page: 4 / 32

Share
Download
Synology NAS SA3200D Hardware Installation Manual Download Page 4

4

  Chapter 1: Before You Start

Synology SA3200D at a Glance

No.

Article Name

Location

Description

1 

Power Button and 

Indicator

Front

1. Press to power on your Synology NAS.

2.

To power off the Synology NAS, press and hold until you hear

a beep sound and the Power LED starts blinking.

2 

HA Status Indicator

Displays the status of the HA (High Availability). For more 

information, see "LED Indicator Table."

3 

Alert Indicator

Displays warnings regarding fan or temperature. For more 

information, see "LED Indicator Table."

4 

Beep Off Button

Press to deactivate the beeping sound that is emitted when a 

malfunction occurs.

5 

Drive Status Indicator

Displays the status of drives. For more information, see "LED 

Indicator Table." 

6 

Drive Tray

Install drives (hard disk drives or solid state drives) here.

7 

Rail Kit Release Tab

Push in and hold to release the Synology NAS from the rail kit 

lock.

1

1

 For more information about the rail kit installation, please refer to the Quick Installation Guide that comes with the rail kit.

Summary of Contents for NAS SA3200D

































Reviews:

No comments