11
Chapter 2: Hardware Setup
•
For 2.5” drives:
Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four
spots indicated below to secure the drive.
3
Insert the loaded drive tray into the empty drive bay.
Note:
Make sure the tray is pushed in all the way. Otherwise, the drive might not be able to function properly.
4
Push the handle inward to secure the drive tray.
5
Push the switch on the drive tray handle to the left to lock the drive tray.
6
Repeat the steps above to assemble the other drives you have prepared.
7
Drives are numbered as shown below.
Note:
We suggest installing drives of the same size to optimize drive capacity usage when creating RAID
volumes.
Summary of Contents for NAS SA3200D
Page 1: ...Synology NAS SA3200D Hardware Installation Guide...
Page 32: ...A VCCI A...