8
Chapter 2: Hardware Setup
3
Load the hard disk in the hard drive tray.
For 3.5” Hard Disk:
Place the hard disk in the hard drive tray, turn the tray upside down, and then tighten
the screws to secure the hard disk.
For 2.5” Hard Disk:
Place the hard disk in the blue area (shown below) of the hard drive tray, turn the tray
upside down, and then tighten the screws to secure the hard disk.
4
Insert the loaded hard drive tray into the empty hard drive bay.
Important:
Make sure the tray is pushed in all the way. Otherwise, the hard disk might not be able to function
properly.
5
Push the hard drive tray handle to secure the hard drive tray.
