background image

request.

Section 11. Disclaimer of Warranties.

 EXCEPT AS EXPRESSLY SET FORTH ABOVE, THE SOFTWARE IS PROVIDED

"AS IS" AND WITH ALL FAULTS. SYNOLOGY AND ITS SUPPLIERS HEREBY DISCLAIM ALL OTHER WARRANTIES,

EXPRESS, IMPLIED OR STATUTORY, ARISING BY LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY

IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, TITLE AND

NONINFRINGEMENT, WITH REGARD TO THE SOFTWARE. WITHOUT LIMITING THE FOREGOING, SYNOLOGY

DOES NOT WARRANT THAT THE SOFTWARE WILL BE FREE OF BUGS, ERRORS, VIRUSES OR OTHER DEFECTS.

Section 12. Disclaimer of Certain Damages.

 IN NO EVENT WILL SYNOLOGY OR ITS LICENSORS BE LIABLE FOR ANY

INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, CONSEQUENTIAL OR SIMILAR DAMAGES OR LIABILITIES

WHATSOEVER (INCLUDING, BUT NOT LIMITED TO LOSS OF DATA, INFORMATION, REVENUE, PROFIT OR

BUSINESS) ARISING OUT OF OR RELATING TO THE USE OF OR INABILITY TO USE THE SOFTWARE OR

OTHERWISE UNDER OR IN CONNECTION WITH THIS EULA OR THE SOFTWARE, WHETHER BASED ON

CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY EVEN IF SYNOLOGY HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Section 13. Limitation of Liability.

 SYNOLOGY'S AND ITS SUPPLIERS' LIABILITY ARISING OUT OF OR RELATING TO

THE USE OF OR INABILITY TO USE THE SOFTWARE OR OTHERWISE UNDER OR IN CONNECTION WITH THIS

EULA OR THE SOFTWARE IS LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE PRODUCT

REGARDLESS OF THE AMOUNT OF DAMAGES YOU MAY INCUR AND WHETHER BASED ON CONTRACT, TORT

(INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY. The foregoing disclaimer of warranties,

disclaimer of certain damages and limitation of liability will apply to the maximum extent permitted by applicable law. The

laws of some states/jurisdictions do not allow the exclusion of implied warranties or the exclusion or limitation of certain

damages. To the extent that those laws apply to this EULA, the exclusions and limitations set forth above may not apply to

you.

Section 14. Export Restrictions.

 You acknowledge that the Software is subject to U.S. export restrictions. You agree to

comply with all applicable laws and regulations that apply to the Software, including without limitation the U.S. Export

Administration Regulations.

Section 15. Termination.

 Without prejudice to any other rights, Synology may terminate this EULA if you do not abide by

the terms and conditions contained herein. In such event, you must cease use of the Software and destroy all copies of the

Software and all of its component parts.

Section 16. Assignment.

 You may not transfer or assign your rights under this EULA to any third party, except for that pre-

installed in the Products. Any such transfer or assignment in violation of the foregoing restriction will be void.

Section 17. Applicable Law.

 Unless expressly prohibited by local law, this EULA is governed by and construed in

accordance with the laws of the country, in accordance with which Synology Inc. was organized without regard to any

conflict of law principles to the contrary.

Section 18. Dispute Resolution.

 Any dispute, controversy or claim arising out of or relating to this EULA will be resolved

exclusively and finally by arbitration conducted by three neutral arbitrators in accordance with the procedures of the

Arbitration Law and related enforcement rules of the country in which Synology Inc. was organized. In such cases, the

arbitration will be limited solely to the dispute between you and Synology. The arbitration, or any portion of it, will not be

consolidated with any other arbitration and will not be conducted on a class-wide or class action basis. The arbitration shall

take place in Taipei and the arbitration proceedings shall be conducted in English or, if both parties so agree, in Mandarin

Chinese. The arbitration award shall be final and binding on the parties and may be enforced in any court having

jurisdiction. You understand that, in the absence of this provision, you would have had a right to litigate any such dispute,

controversy or claim in a court, including the right to litigate claims on a class-wide or class-action basis, and you expressly

and knowingly waive those rights and agree to resolve any disputes through binding arbitration in accordance with the

provisions of this Section 18. Nothing in this Section shall be deemed to prohibit or restrict Synology from seeking injunctive

relief or seeking such other rights and remedies as it may have at law or equity for any actual or threatened breach of any

provision of this EULA relating to Synology's intellectual property rights.

Section 19. Attorneys' Fees.

 In any arbitration, mediation, or other legal action or proceeding to enforce rights or remedies

under this EULA, the prevailing party will be entitled to recover, in addition to any other relief to which it may be entitled,

costs and reasonable attorneys' fees.

Section 20. Severability.

 If any provision of this EULA is held by a court of competent jurisdiction to be invalid, illegal, or

unenforceable, the remainder of this EULA will remain in full force and effect.

Section 21. Entire Agreement.

 This EULA sets forth the entire agreement of Synology and you with respect to the Software

and the subject matter hereof and supersedes all prior and contemporaneous understandings and agreements whether

written or oral. No amendment, modification or waiver of any of the provisions of this EULA will be valid unless set forth in a

written instrument signed by the party to be bound thereby.

Summary of Contents for DS1621xs+





























Reviews: