background image

3

www.synexis.com

+1 844-352-7680

  4.   This Sentry device is not a toy. Use caution when children are nearby. Children under  

3 years old should be kept away unless continuously supervised. Do not allow children to 

play with the Sentry device.

  5.   This Sentry device is not intended for use by persons (including children) with reduced 

physical or reasoning capabilities, or lack of experience and knowledge, unless they have 

been given supervision or instruction about the use of the Sentry device by a person 

responsible for their safety. 

  6.   Sentry device is suitable for dry locations ONLY. DO not use outdoors, on or near wet 

surfaces. Do not use in bathrooms, laundry areas or similar indoor locations. Never place 

the Sentry device where it may fall into a bathtub or other water container. Do not use or 

store near a bath or shower, or a swimming pool. 

  7.   Do not use the Sentry device in areas where fuel, paint, or flammable liquids are used or 

stored where their vapors are present. 

  8.   Do not use in conjunction with or directly next to an air freshener or similar products.
  9.  Do not handle any part of the plug or Sentry device with wet hands. 
 10.  UV light source. Disconnect power cord before opening cover.

 

11.  Do not sit on or place any object on this device. 

  12.   Do not use with a damaged power cord or plug. If the power cord is damaged, it must  

be replaced by Synexis, its service agent or similarly qualified persons in order to avoid  

a hazard. 

  13.   Do not unplug the Sentry device by pulling on the power cord. To unplug, grasp the plug,  

not the cord and remove from the power outlet.

  14.   Do not stretch the power cord or place the cord under strain. Keep the power cord away 

from heated surfaces. 

  15.   Do not run the power cord underneath carpeting. Do not cover cord with throw rugs, 

runners or similar coverings. Do not route cord under furniture or other appliances.  

Avoid placing power cord in high traffic areas and where it could be tripped over.

  16.   To prevent a possible fire, do not use with any opening or exhaust blocked, and keep free 

of dust, lint, hair, and anything that may reduce airflow. Do not put any object into the inlet 

grill or exhaust opening as this may cause electric shock or fire, or damage to the Sentry 

device.

 

17.  In order to avoid overheating, do not cover the Sentry device.

  18.   For the best performance, place the Sentry device where air intake and top grill are 

unobstructed.

  19.   Turn off all controls before unplugging. Always unplug Sentry device from the power outlet 

when it is not in use.

Summary of Contents for Sentry

















Reviews: