Synexis Sentry, Owner'S Manual

Page: 11 / 16

11
www.synexis.com
+1 844-352-7680
WARNING: UV-A bulbs contain a small amount of mercury similar to any fluorescent bulb. Check
with your local waste management authority for disposal or recycling requirements. Additional
disposal and recycling information can be found at: www.lamprecycle.org .
Getting the most from your DHP
™
System
It is important to work with your Synexis Account Representative to determine the proper number of
units for the size and configuration of your space. In some cases, multiple Synexis devices will be
necessary. Be sure to change the Sail according to the recommended replacement schedule. Leave
unopened Sails in their plastic bag and store them in a dark, dry location until you need to replace the
current Sails in your device.
Close your windows and outside doors
The Sentry is designed for enclosed space, so it is important to keep all external windows and doors
closed as much as possible. Open windows and/or doors can significantly reduce the efficiency of
your system by allowing the DHP™ to dissipate out of the facility.
Run your Synexis System 24 hours a day
The Sentry is designed to operate 24 hours a day, 7 days a week. DHP™ is meant to be a continuous
clean technology as opposed to a temporary clean technology. The DHP™ molecule is delicate and
safe at low concentration. Producing it continuously ensures a proper equilibrium concentration in
your space for effective decontamination.
*
* DHP™ is deployed at less than 20 parts per billion. This produces extremely effective microbial reduction at incredibly
safe levels of H
2
O
2
. A single Synexis device would have to run continuously for 2.5 years to reach the concentration
of 1 droplet of a 3% aqueous solution of H
2
O
2
. DHP™ concentrations fall far below acceptable safety limits for human
exposure established by the Occupational Safety and Health Administration (OSHA).