21
5. Abduction Supports: Width
The SEGO Growth Kit includes two (2) sizes of abduction
supports
A
(Fig. 48).
Select the one that best fits the user and complete the
following steps:
5.1 Small Abduction Supports
5.1.1
Remove the tightening knob
A
(Fig. 49).
5.1.2
Adjust to the required width
by sliding the metal slat along
the
knob
screw
B
(Fig 49).
5.1.3
Reinstall and tighten the knob securely, using the hex (Allen) key anchored to
the cylinder beneath the seat.
5.2 Large Abduction Supports
5.2.1
Remove the tightening knob
A
(Fig. 50).
5.2.2
Remove the colour seat cushions
B
(Fig 50).
5.2.3
Insert the two (2) screws on the large-sized
abduction support into the seat slot
C
(Fig. 50).
5.2.4
Tighten the knob securely, using the hex (Allen)
key anchored to the cylinder beneath the seat.
5.2.5
Adjust and position the abduction supports to
the required width by loosening the knob
underneath the abduction support and
sliding the metal slat along the screw and tighten
the knob securely, using the hex (Allen)
key anchored to the cylinder beneath the seat.
6. Seat Angle (Tilt-in-Space)
The seat angle can vary from 0⁰ to 30⁰ degrees. To adjust, first check that
the anti-tip lock knob is loosened
A
(Fig. 51). Then push on the release
lever located under the seat
B
(Fig. 52).
Note:
The tilt angle of the seat can be safely adjusted while the
child is seated.
Caution:
Be sure to firmly grip the SEGO seat before activating
the tilt-in-space angle adjustment lever in the stroller frame.
Summary of Contents for SEGO
