manualshive.com logo in svg

Synetik ErgoCare SEGO, User Manual

Share
Download
Synetik ErgoCare SEGO User Manual Download Page 13

13

List of Items:

• 

Positioning Seat   

 

• 

User Manual

• 

Hex (Allen) Key (5/16) 

 

• 

Hi/Low Base (Optional)

• 

3 Central Backrest Cushions (Black)

• 

3 Central Seat Cushions (Black)  

• 

Footrests (2 sizes) 

 

 

 

• 

Lateral Seat and Backrest Cushions (Colour: Red or Blue)

• 

Covers for Postural Supports (Colour: Red or Blue)

• 

Tray (Optional)

• 

Canopy (Optional)

• 

Abduction Supports (2 Sizes)

• 

Thoracic Supports

• 

Interface Plate for Stroller Frame (Optional)

Unpacking Contents of Boxes

1.  Remove the contents from the boxes and lay on a flat surface. 
2.  AVerify that the material corresponds with what was ordered and that no damage occurred during 

transport. 

3.  Follow the instructions in the next section (Assembly of the SEGO Seating System).

Caution: 

Certain parts are sealed in a plastic bag. Keep bags out of the reach of babies and children. 

The thin material is a choking hazard that can obstruct nostrils and/or the mouth.

Caution: 

Certain SEGO Seating System parts are chocking hazards for children. Always ensure parts 

are securely fastened to the seat. 

Summary of Contents for SEGO





























Reviews:

No comments

Brands by name

Popular brands

Load more brands