17
Seat Inlay - 010-175
Install-
1-
Unclip the shoulder straps of the 5-point belt.
2-
Place the seat inlay over the seat and run the shoulder straps through the holes in the
reduction pad according to the shoulder height of the child.
3-
Run the side straps of the 5-point belt under the sides of the seat inlay.
4-
Insert the top strap of the seat inlay over the top of the backrest. This will secure the seat
inlay in place and allow the stroller to be folded with the inlay installed.
5-
Secure shoulder straps to the 5-point belt.
6-
If necessary, it is possible to adjust the width and the depth of the seat.
Width - Remove or add the side pads that are attached with Velcro.
Depth - Remove, add or trim the backrest wedge that is located behind the inlay.
Remove-
To remove the reduction pads, do the opposite.
Canopy Classic – 010-176
Install-
Run the plastic canopy clamps through the holes in the upholstery and secure them over top of the
chassis frame. The holes are on the interior side of the upholstery, just over the metal snap, second
from the bottom. (see picture)
Remove-
To remove the canopy, do the opposite.
