Synergy NSC CONTENDER, Instruction Manual

Page: 4 / 61

Tools Required For Assembly
Equipment Required For Assembly (not included)
Transmitter (6-channel or more, helicopter) •
Receiver (6-channel or more) •
Standard Servos x3 (cyclic servos) •
Mini Servo x1(Futaba 9650 or 9257 for throttle •
High Speed Tail Servo x1 •
Heading Lock Gyro or Flybarless System x1 •
50-55 Nitro Engine x1 •
50-55 Muffler x1 •
Pitch Gauge •
Engine Starter with Starting Wand x1 •
2S 1800mah Lipo Battery for Regulator x1 •
6v Regulator x1 •
600-625mm Main Rotor Blades •
85-95mm Tail Rotor Blades •
Silicone Fuel Tubing •
Helicopter Fuel 15-30% •
Glow Plugs •
Needle Nose Pliers •
Diagonal Cutting Pliers •
Phillips Screw Driver Set •
Hex Drivers 1.5/2/2.5/3 •
Scissors •
Grease •
CA Glue •
Loctite - Blue & Red •
JB Weld •
Metric Ruler •
Boto-Sizer Ball Link Sizing Tool (Part# 700-001) •