Synergy NSC CONTENDER, Instruction Manual

Page: 25 / 61

Pitch Slider Assembly
615-319 Tail Pitch Slider Bushing (for 6mm shaft)
108-812 8x12x2.5 Radial Bearing
107-103 2mm Pivot Ball Short
115-319 Tail Bearing Ring
108-812 8x12x2.5 Radial Bearing
115-322 Tail Pitch Link
106-813 Tail Slider Lock Ring
606-921 Tail Pitch Link Pin
506-920 E-Ring
115-321 Pitch Plate
Use Medium CA to secure 2mm pivot ball
1. After installing lock ring be sure that the
radial bearings do not have lateral load
on them. Adjust lock ring as needed to
ensure smooth operation.
2. Secure lock ring with CA or Epoxy
Red Loctite Tail Pitch Slider to Tail
Pitch Plate for extra security.
A21
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 N5 Tail Pitch Plate 1
2 N5 Tail Pitch Link 2
3
N5 Tail Pitch Slider
Bushing
1
4 N5 Tail Bearing Ring 1
5 N5 Tail Pitch Link Pin 2
6
N5 2mm Pivot Ball
Short
1
7
8x12x2.5 Radial
Bearing
2
8 Tail Slider Lock Ring 1
9 506-920 E-Ring 2