100-412 M4x12 Socket Head
310-130 Motor Mount 30mm
100-466 M4x6 Set Screw
Helical Pinion (12T included in kit)
Recommended Motor -
Scorpion Ultimate 520kv
Available Pinions
305-012 - 12T Helical Pinion
305-013 - 13T Helical Pinion
305-014 - 14T Helical Pinion
305-015 - 15T Helical Pinion
Brushless Motor Mounting
Page 17
Important!
Motor mount is designed to accept motor
with 4mm bolts and 30mm bolt pattern option.
25x3mm motor mounting was left out due to weakness
of the M3 bolts and increasing power of todays motors.
Motor shaft should be minimum of 32mm in length
outside of the motor in order to properly engage
motor shaft bearing block.
Inportant!
Pinion should rest on inner race
of lower pinion support. Failure
to configure properly will result
in premature motor bearing wear.
Note - Synthetic grease may be used
on main gear / pinion in order to reduce
heat and improve gear interaction.
