Swash Follower Arm Assembly
106-301 M3 Shim
108-383 3x8x3 Radial Bearing
305-206 E5 Washout Control Arm
109-352 3x5x2 Brass Spacer
108-383 3x8x3 Radial Bearing
108-383 3x8x3 Radial Bearing
100-323 M3x23 Socket Head
100-316 M3x16 Socket Head
109-352 3x5x2 Brass Spacer
108-383 3x8x3 Radial Bearing
107-100 Ball Link
100-272 M2.5x12 Set Screw
305-207 E5 Ball Link Adapter
106-301 M3 Shim
Note - Do not tighten 100-323 bolt until the
next page. These will pinch and secure the
main shaft.
Page 46
WWW.SYNERGYRCHELICOPTERS.COM
IMPORTANT!
Remove M2.5x12 Set Screw from Ball Link Adapter
before attempting to remove M3x16 Socket Head.
The M2.5x2 Set Screw is sitting against the M3x16
bolt and will destroy the bolt threads and the Ball
Link Adapter threads if you attempt to remove the
bolt without first removing the set screw.
Summary of Contents for 999-308
