background image

 
 
 

 

LIMITED WARRANTY

 

 

Synergy Systems, LLC warrants 

GSynQ Antenna and Evaluation Kit

 

Components 

against defects in material and workmanship, under normal 

use and service, for a period of one year from the product’s ship date from 
Synergy Systems. 
 
The Motorola designed ILotus M12M Oncore GPS receiver contained in 
the GSynQ Sensor is trademarked by SiRF and manufactured by i-Lotus 
Corp of Singapore. GPS receivers from other manufacturers are available 
for integration by Synergy on request. 
 
Any returned product must be accompanied by a Material Return 
Authorization (MRA) number issued by Synergy Systems.  After obtaining 
an MRA number, send the product transportation and insurance prepaid 
to:  

 

Synergy Systems, LLC 

9950 Scripps Lake Drive, Suite 106 

San Diego, CA 92131 USA 

TEL: (858) 566-0666 

FAX: (858) 566-0768 

 

GPS PERFORMANCE 

 

The Global Positioning System (GPS) is operated and supported by the 
U.S. Department of Defense and is made available for civilian use solely 
at its discretion.  The GPS is subject to degradation of position and 
velocity accuracies by the Department of Defense.  Neither Synergy 
Systems, SiRF or iLotus warrant or control GPS availability or 
performance. 

 

Copyright 2000-2011 Synergy Systems, LLC 

 
 
 
 

Summary of Contents for GSynQ








Reviews: